6-14
Upgrading the Minitower Workstation
Writer: Debbie Thomson Saved by: Lydia Sanchez Saved date: 09/09/99 9:33 AM
Pages: 30 Words: 3654 Template: c:\msoffice\templates\comm.dot
File Name d-Ch6.doc Part Number 158415-001
16. Reconfigure the workstation, if necessary. Refer Chapter 2,
Software,” for instructions about using Computer Setup.
If you normally lock the Smart Cover Lock, use Computer
Setup to relock the lock and enable the Smart Cover
Sensor.
Installing Additional
Drives
When installing additional drives, follow these guidelines:
■
Use the green pull tabs to disconnect the diskette and
hard drive cables from the drives.
■
For optimal performance, connect hard drives to the
primary IDE controller. Connect expansion devices,
such as IDE CD-ROM, tape, and diskette drives to the
secondary controller.
■
You may install either a third-height or a half-height
drive into a half-height bay.
■
You must install guide screws to ensure the drive will
line up correctly in the drive cage. Compaq has
provided extra guide screws, installed in the front of the
workstation chassis, under the front bezel. Some
options use M3 metric thread hardware. The Compaq-
supplied metric screws are black.
Summary of Contents for Deskpro AP240
Page 1: ...Reference Guide Compaq Deskpro Workstation AP240...
Page 216: ......
