8-10
Troubleshooting
Writer: Elizabeth Hedstrom Saved by: Debbie L. Thomson Saved date: 07/30/99 2:39 PM
Pages: 17 Words: 3680 Template: c:\msoffice\templates\comm.dot
File Name d-ch8.doc Part Number 158415-001
Solving
Hardware
Installation
Problems
You may need to reconfigure the workstation when you add or remove
hardware, such as an additional diskette drive. To reconfigure the
workstation in Windows NT 4.0 after installing new hardware, use the
utility provided with the hardware.
Problem
Cause
Solution
A new device is not
recognized as part of
the workstation system
The workstation needs to be
reconfigured to recognize the
device.
Follow the reconfiguration instructions above.
Cable(s) of new external
device are loose or power
cables are unplugged.
Ensure that all cables are properly and securely
connected and that pins in the cable or
connector are not bent down.
Power switch of new external
device is not turned on.
Turn off the workstation, turn on the external
device, then turn on the workstation to integrate
the device with the workstation system.
Summary of Contents for Deskpro AP240
Page 1: ...Reference Guide Compaq Deskpro Workstation AP240...
Page 216: ......
