Reference Guide
G-7
Writer: Your Name Saved by: Lydia Sanchez Saved date: 07/30/99 4:33 PM
Pages: 8 Words: 1297 Template: c:\word7\templates\commapp.dot
File Name e-appg.doc Part Number 158415-001
A choice of five headings appears in the Computer Setup (F10
Setup) Utilities menu: File, Storage, Security, Power, and
Advanced.
To reset CMOS to the factory default settings use the arrow
keys or the Tab key to select File
→
Set Defaults and Exit.
Refer to Chapter 3, “Desktop Management,” for further
instructions on reestablishing passwords. For instructions on
Computer Setup (F10 Setup), see Chapter 2, “Software.”
Locating the System
Board Switch
Module (Intel BX
Chipset)
The system board includes a switch module (SW1) that is used:
■
to enable or disable the power-on password
■
to set the operating frequency for the microprocessor
after a processor upgrade installation
■
to set the power switch so that power to the workstation
can be turned on using a power strip
Switch Module and Location on the System Board
Summary of Contents for Deskpro AP240
Page 1: ...Reference Guide Compaq Deskpro Workstation AP240...
Page 216: ......