Commax CVN-0430F User Manual Download Page 72

Page: 72 / 122

Remote playback

To playback video stored in a remotely connected DVR via network.

Thumbnail refresh: To refresh current video of connected site.

Add site: To add a new site.

Delete site: To delete selected site(s).

Net finder: To find devices on the same network and to change site.

Connect

Connect a selected site.

Disconnect

Disconnect network connection.

Setup

Enter setup menu of CCMS MULTI CLIENT.

Capture

Still image capture

Event log

Log display of CCMS MULTI CLIENT connection and disconnection.

Pause

Pause playback.

Alarm

On/Off the alarm of selected channel in CCMS MULTI CLIENT.

RECORD ON

Store live display onto local PC

AUDIO

Volume control

MIC

Microphone volume control

Camera control buttons

PAN left /right

TILT up/down

ZOOM in/out

FOCUS in/out

To change the screen of selected site from 4, 9, 16 split display.

CHANNEL SPLIT

To select main display settings.

Summary of Contents for CVN-0430F



























































































































Search results

Summary of Contents for CVN-0430F

Reviews:

Commax CVN-0430F, User Manual, Page: 72 / 122

Search results

Summary of Contents for CVN-0430F

Reviews: