Commax CVN-0430F, User Manual, Page: 50 / 122

50
(ddns.commax.com)
7. Check before click on “OK” whether the user ID and password are same as the ones pre-registered at COMMAX DDNS
SERVER.
8. Click “OK” to complete DDNS service settings
CAUTION) if the DVR already has DDNS registered and it needs to be changed,
First, set DDNS as “OFF”. Complete the settings and then, a new DDNS shall be registered.
CAUTION: If the DVR is purchased as a second-hand and/or not an original owner, please change and
register new DDNS HOST NAME, user ID, and password for better security.
4-9-4. Run Commax DDNS
1. Commax DDNS and DVR is communicating every 10 minutes and DVR rebooting and when DDNS
set.
2. How to check the set DDNS status.
- Click the System information tap at ‘system’ menu or right mouse click.
A. Ready : communicating with set DDNS server
B. Not Ready : Not communicating with set DDNS server.
- Reason for ‘Not Ready’ and how to check
When the DVR is not connected to internet (External server)
Check the server type whether ‘Commax’ or the other.
Check the ID and Password that applied at ddns.commax.com
If user is not applied at ddns.commax.com, check the DDNS host name from icomma
x.net.
4-10. Setup - CONFIG Mode
In the SETUP menu, select the CONFIG tab. Then, the configuration menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item.