Commax CVN-0430F, User Manual, Page: 36 / 122

36
OSD CONTRAST Set the visibility level of the On Screen Display (OSD) (50~100)
SEQUENCE
Enable/disable sequential display of video in full screen mode.
SEQUENCE
DWELL TIME
Set the dwell time of each,
single channel display in sequential display mode (3~60seconds)
CHANNEL Select a channel to apply the name and covert settings change using the
mouse or control button on the remote control.
Select a channel to apply the following settings using the mouse.
NAME Set the channel name. Press the right square button and set the channel
name and select OK using the mouse.
The name can be made up to 10 characters.
COVERT Enable/disable display of the specified video channel in live display.
VIDEO OUTPUT Select 1280x720 or 1920x1080.
4-4. Setup – RECORD Mode
In the SETUP menu, select the RECORD tab. Then, the RECORD menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item.
Figure 4.4.1. RECORD Setup Screen