Commax CVN-0430F, User Manual, Page: 42 / 122

42
DATE FORMAT Select the date display format using the mouse or the control button on the remote
control. Options are: MM/DD/YYYY, YYYY/MM/DD, DD/MM/YYYY, YYYY-MM-DD, MM-
DD-YYYY, DD-MM-YYYY
SET
DATE&TIME
Select the display date and time using the mouse or the control button on the remote
control and press OK button to set the present date and time.
Select DAYLIGHT SAVING using the mouse and the control button on the remote
control and select the appropriate daylight saving time zone. The options are:
If choosing EU or OTHERS, set the applicable conditions.
The options are: OFF / USA / EU / OTHERS
OFF : Daylight saving is turned off.
USA : Applies the USA daylight saving time.
EU : Applies the EU daylight saving time.
- Select the GMT AREA using the mouse or the control button.
- Set the time difference with the standard time using the mouse or the button.
OTHERS : If the time zone is neither USA nor EU, set the date and time of the daylight
saving period.
- Select BEGIN or END using the control button and press the SEL button.
Caution
- Do not set the start time to 23:00 for DLS.
- DLS cannot be applied if the date of BEGIN and END is the same.
CLIENT
ACCESS
Enable/Disable remote access through the network.
NTP NTP (Network Time Protocol) which synchronizes the time of the computer systems over
variable-latency data networks.
PRIMARY SNTP SERVER : Input the address of the primary NTP time-server.
SECONDARY SNTP SERVER : Input the address of the secondary NTP time-server.
TIME ZONE : NTP synchronizes with GMT (Greenwich Mean Time) regardless of