Commax CVN-0430F, User Manual, Page: 44 / 122

44
SYSTEM
EVENT
NOTIFICATION
HEALTH CHECK – OFF, ON
(Allows the user to set MAIL STATUS periodically) : DAILY or WEELY or MONTHLY
EVENT AND NOTIFICATION – OFF, ON
(Allows the user to set EVENT NOFICIATION ON or OFF)
HEALTH CHECK / RESTART / SHUTDOWN / PANIC RECORD
- Enable Email Notification in the event a problem occurs with the NVR.
ALARM-IN – Enable Email Notification when the camera detects sensor.
MOTION DETECTION – Enable Email Notification when the camera detects motion.
NO CONNECTION –
Enable Email, Beep and Alarm output Notification when the
camera signal is lost.
HDD TEMPERATURE – Enable Email, Beep and Alarm output Notification when the
HDD temperature.
HDD BAD SECTORS – Enable Email Notification when the HDD has bad Sectors.
HDD ALMOST FULL – Enable Email Notification when the HDD is almost full
HDD FULL – Enable Email Notification when the HDD is full
HDD FAILURE – Enable Email, Beep and Alarm output Notification when the HDD fails.
4-8. Setup – SECURITY Mode
In the SETUP menu, select the SECURITY tab. Then, the SECURITY menu is displayed as pictured below.
Navigate through the menu items using the mouse or the control button on the remote control and change
the value of the menu item.