Commax CVN-0430F User Manual Download Page 57

Page: 57 / 122

Table 5.1.2. Menu Items in Quick Operation Window

Icon

Description

QUICK

INSTALLATION

Get into Quick Installation mode.

DISCONNECT

Select this option to disconnect/connect from IP Camera.

SETUP

Setup button. Click this button to go to a setup menu.

AUDIO MUTE

Select this option to mute audio on all channels.

Search button. Click this button to enter the search menu.

BACKUP

Capture pictures and store as BMP files

INSTANT PLAYBACK

Live screen, you can fast search.

(Go Back to 10sec, 20sec, 30sec, 60sec).

IP CAMERA

INFORMATION

Press the button to view the record setting of a selected channel.

SYSTEM

INFORMATION

Press the button to view the system information.

SYSTEM LOCK

Locks the NVR from unauthorized user access

SYSTEM SHUTDOWN Select this option to shutdown system.

5-2. Digital Zoom in Live and Playback Screen

NVR series supports Digital Zoom feature during live and playback mode.

1. Double click the target channel.

2. Click the left button of the mouse and drag to make rectangular shape.

Summary of Contents for CVN-0430F



























































































































Search results

Summary of Contents for CVN-0430F

Reviews:

Commax CVN-0430F, User Manual, Page: 57 / 122

Search results

Summary of Contents for CVN-0430F

Reviews: