49
Automatic water inlet and direct drain system installation
This accessory may be fitted after installing the steriliser and it includes both the
automatic
water inlet
29
and
direct drain system
30
. These systems are the same for all models: only
the tube length and arrangement changes.
•
Pull out the steriliser (if built-in), place it in an appropriate position and remove the
cover.
•
Remove plugs (
T
) from the lower part of the steriliser (right-hand side).
•
Fit the plastic fitting on the larger hole used for draining.
•
Fit the fittings and the hose holders for the
automatic water inlet
29
on the smaller
hole. Direct the hose holder towards the drain.
Automatic filling
Summary of Contents for STERILCLAVE 18 B
