Comet MS6D, Instruction Manual, Page: 6 / 56

6 ie-ms2-MS6-10
1. GENERAL SAFETY PRECAUTIONS
The following list of precautions serves to reduce risk of injury or damage of described instrument.
To prevent injuries use instrument accordingly with rules in this manual.

Follow rules specified in part Not allowed manipulations and notice

Installation and service need to be performed only by qualified person.

Use suitable power source. Use only source with power voltage recommended by the
manufacturer and approved in accordance with proper standards. Pay attention, the source has
undamaged cables or cover.

Connect and disconnect correctly. Do not connect and disconnect cables, if device is under
electrical voltage.

Do not use instrument without covers. Do not remove covers.

Do not use instrument, if it does not work correctly. If you mean instrument does not correctly,
let it check by qualified service person.

Do not use instrument in environment with danger of explosion.
2. WIZARD for INSTALLATION and CONFIGURATION of DATA LOGGER
2.1.1
Mounting of data logger and its accessory

Select suitable location for placing data logger
–
pay attention to parameters of ambient
environment, minimize the number of cables, avoid sources of interference

Mounting of sensors and routing of cables
–
pay attention to rules of theirs installation, use
recommended working positions, avoid devices and distribution of power electricity

Check proper connection
–
before first switching on. If data logger controls other actuating
devices of regulation, it is recommended to put them out of operation before configuration of
data logger.
Basic rules for mounting of data logger are described in chapter RULES for MOUNTING and
CONNECTION DATA LOGGER . Detailed information on different connections to the PC are
described in Appendix No. 3 in electronic version.
2.1.2
Basic activation of data logger

Connection of data logger to power - connect data logger to power and visually check its
function (indication of power, optionally the display and keyboard)

Installation of software - install user program to the PC (see part PROGRAM for DATA
LOGGER )
Configuration of data logger communication with computer
–
in user SW in part
Configuration-Setting of communication configure and test the data logger connection to
computer. Basic description of Setting of communication interface is in chapter
RULES
for MOUNTING and CONNECTION of DATA LOGGER . Detailed description is in
Appendix No. 3 in pdf format.
Program enables to work simultaneously with several data loggers, that are connected to the
computer in different ways.