ie-ms2-MS6-10
15
connect passive two-wire current transmitter between terminals +Up and COM. Verify, if
power voltage (see
Technical parameters of inputs
) matches connected transmitter.
Insertion of other devices to current loops is possible (panel displays, computer measuring cards etc.
But output circuitry of such devices must be galvanically isolated, otherwise undesired current
coupling is created, causing error and unstable measurement.
Connection of device with voltage output data logger input
use shielded leads for voltage measurement - maximum distance about 15m
connect measured voltage between terminals IN and COM. TeUp can be used for
transmitter powering if needed (see
Technical parameters of inputs
) . In this case use terminal GND
instead of terminal COM.