10
ie-ms2-MS6-10
Mechanical drawing of MS6-Rack data logger:
Recommendations for mounting:
Use original included screws to mount side brackets or DIN rail holder. Using longer crews
can cause reduction of insulation distance between screws and printed circuit board or short
circuits. This can cause system functionality and safety of the users!
do not mount data logger near sources of interference (data logger must not be
mounted directly to power switchboard nor to its nearness. Also do not mount data logger
near power contactors, motors, frequency converters and other sources of strong
interference).
In cable routing follow rules of standards for installation of low current distribution (EN
50174-2), especially it is necessary to pay attention to avoid electromagnetic interference
intrusion to the leads, transmitters, transducers and sensors. Do not locate cabling near
sources of interference.
Do not use leads in parallel with power distribution network leads