• Output pulse type: button used to select the Output type:
◊ Continuous - the signal from the output is continuous
◊ Pulsed - the signal from the output is pulsed (3 sec. on/ 3 sec. off)
◊ One pulse - the signal from the output is a single pulse (5 sec.)
• Type / Function: button used to select the Output type as described previously.
• Edit Outputs Map: screen for entering the inputs on the logic diagram for the output.
• More: screen for filling in the parameters relating to each type of output.
4.6.1 Submenus for selecting the output type
•
PERIPHERY
: select this option when the output is a periphery device terminal (relay output module).
Press “MORE” to program the following parameters:
17/06/2020 14:06
Periphery device output parameters
2
Periphery device address
1
Periphery device output relays (1-4)
◊
Periphery device output
: enter the relay module output number (from 1 to 4).
To save any new parameters, press “Save”.
61
