Coltene SciCan BRAVO G4, Technical & Service Manual

Page: 13 / 116

Sterilizers Bravo G4
- TECHNICAL MANUAL
EN GUIDELINES - SAFETY TEST - VALIDATION (IF REQUIRED)
11
3.3. APPLICATION EXAMPLE WITH INSTRUMENT SECUTEST SIII+ ON STERILIZER

Measurement of ground conductor resistance.

Measurement of ground-leakage current.

Measurement of insulation resistance between network and grounding.
Disconnect power supply cable of the device and connect it to the relevant instrument socket (e.g.:
SECUTEST SIII+). Activate the device to be tested.
NOTE: The device under test must be on and must be pre-heated in advance by operating a cycle of at
least 30 minutes, until it reaches the operating temperature, as required by the Standard.
Select the type of test with reference to standard IEC 61010, from PC or tester screen. Follow the instructions
displayed with reference to the visual check and device data entry (e.g.: serial number).
Power up the device and select the Standard.
INITIAL SETTING
CONNECTIONS WITH THE MACHINE POINTS MUST BE KEPT FOR THE TESTS DESCRIBED
BELOW.
NOTE:
Follow the instructions requested by the control instrument.
E.G.: SECUTEST SIII+ instrument connection