Coltene SciCan BRAVO G4, Technical & Service Manual

Page: 112 / 116

Sterilizers Bravo G4
- TECHNICAL MANUAL
110
TECHNICAL MAINTENANCE EN
8.3.5. DOOR LOCK LUBRICATION
By using a clean cloth, remove any residues from the bushing and the screw.
Lubricate the inside of the bushing on the sterilizer door with a film of the silicon-based grease provided (as shown in
the figure).
Wear single-use gloves before application. Essentially, the lubricant is not irritant to the skin; nevertheless, it may
cause unpleasant effects if it accidentally comes into contact with eyes.
In case of contact with eyes, rinse with plenty of water.
8.3.6. ANTI-DUST FILTER CLEANING
Remove the filter (
A
) from the lower part of the autoclave, thoroughly rinse it with water and dry it before refitting it.
The filter cleaning is possible using a jet of compressed air, making sure not to disperse any dust into the
environment.
8.3.7. BACTERIOLOGICAL FILTER REPLACING
When filter maintenance is due or every time you notice visible clogging of the filter (indicated by the filter markedly
turning grey), unscrew the bacteriological filter ( B ) from its support and replace it with a new one, screwing it fully
down on the union. A spare bacteriological filter included with standard equipment.