32
To enable the CRX-Relay option the user should take the following
steps.
•
Select the output frequency by entering a suitable frequency in
MHz into the ‘Output Frequency’ tab.
•
Select the desired modulation type by entering suitable values
in the bandwidth, FEC, Constellation and Guard Interval
parameters.
•
Select the services that should be rebroadcast, by clicking the
appropriate check boxes in the channel selection area. When
the bitrate set by the relay modulation parameters is greater
than the aggregate bitrate of the selected channels, then the
bitrate OK alarm will go green. This should be an iterative
process, because the modulation should not be set excessively
high, to rebroadcast range.
•
Enable the CRX-Relay by setting modulation to ON.
4.2 How do I decode the CRX-Relay Video Services
The domo downlink receiver is used to decode services that are
rebroadcast using the CRX-Relay option, contact domo for more
information.
Modulation
Parameters
Channel
Selection
