11
Note: Receivers are made frequency specific by the addition of the appropriate
downconverters.
1.5 Controls
There are no external user controls on the domo
SOLO4 Central Receiver,
control is achieved using the PC application, connection from the PC to the CRX
can be via IP Ethernet interface or via the RS232 Interface.
The domo SOLO4 Central Receiver is fitted with 5 LEDs on the front panel. The
position of the LEDs is shown on the diagram below.
The LEDs have the following meaning
LED
Colour
Meaning / Use
Power
Solid Green
Flashing
Green
Flashing
Amber
Booting Up
Flashes once per second when operational, flashes faster when
control messages received
Warning – Typically seen when unit is trying to stream or
rebroadcast more data than allocated
Status 1
Red
Amber
Green
No Lock on Receiver 1
RF Lock on Receiver 1 but no decoder lock
Receiver 1 fully locked and decoding
Status 2
Red
Amber
Green
No Lock on Receiver 2
RF Lock on Receiver 2 but no decoder lock
Receiver 2 fully locked and decoding
Status 3
Red
Amber
Green
No Lock on Receiver 3
RF Lock on Receiver 3 but no decoder lock
Receiver 3 fully locked and decoding
Front View
Rear View
LEDs
