25
Software Version Numbers
The software version numbers of the entire central receiver and all the
individual receivers within are described here.
Unit Status
The internal temperature (-10 to +50 deg maximum) of the central
receiver and also the internal voltage (should be approximately 12V)
can be monitored here.
Unit IP Parameters
The IP parameters of the equipment can be set using these fields, this
will allow the control and connection of the unit over the IP interface
(ETH0). These should be set with the advice the network service
provider.
Video Monitor Output Control
This parameter controls which video is presented on the monitor/quad
video output on the front of the unit. The user can select for this output
to display any of the individual receiver outputs, or to display all four
outputs as a quad split display.
Remultiplexing Parameters
These parameters control how services are remultiplexed and
transmitted over the option Netstream IP or Microwave Relay outputs.
If automatic service renaming is selected, then the central receiver will
automatically rename the received services according to the following
convention.
Software Version
Numbers
Unit Status
Video Monitor
Output Control
Unit IP
Parameters
Remultiplexing
Parameters
