All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 98 of 120
User button function
Description
Marker zoom
a single press sets a zoom marker on the
zoom scale. When highlighted in yellow, a
single press allows you to change the color
(R,G,B). You can set up to three color-cod-
ed digital zoom marks. Pressing the user
button for 3 seconds will delete the select-
ed marker. Pressing the user button for 6
seconds will delete all markers from the
scale. A set zoom marker will give progres-
sive haptic feedback when getting close to
and hitting your mark.
Marker distance
a single press sets a focus marker on the
focus scale based on the measured range-
finder distance (rangefinder required). If
a marker is highlighted in yellow, a sin-
gle press allows you to change the color
(R,G,B). You can set up to three color-cod-
ed digital focus marks. Pressing the user
button for 3 seconds deletes the select-
ed marker. Pressing the user button for 6
seconds deletes all markers from the fo-
cus scale. A set focus marker will give you
progressive haptic feedback when getting
close to and hitting your mark.
***Target A / B / C / M
Depending on the rangefinder´s capabili-
ties****, Target A / B / C allow you to se-
lect a rangefinder target and to trigger AF
ramp modes between the manual focus
controller and a rangefinder target. Target
M allows you to select the manual focus
controller (e.g. the focus knob) as a target
and to trigger AF ramp modes between a
rangefinder target and the manual focus
controller. For available AF ramp modes,
please refer to section “6.2.3.7.5. AF Ramp
mode*” on page 89 ff. in this manual.
* cPRO / cPRO PLUS hand unit feature only, not available for cPRO ONE hand unit
** available with cmotion Cinefade VariND only
*** RANGE license key required
**** amount of targets depending on rangfinder model and firmware:
cmotion
cvision:
- 2 targets and license features available from Dec. 2020
- up to 3 targets available from Q1 2021
cmotion cfinder III:
- 1 target available
- licence features available from Dec. 2020
CineRT Focus Bug:
- 1 target available with current LCUBE-1 SW release
- up to 3 targets and licence features available from Q1 2021
all other supported 3rd party rangefinder:
- 1 target available with current LCUBE-1 SW release
- licence features available from Q1 2021