All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 33 of 120
6.1.4.
Rangefinder main screens
The rangefinder main screens are enabled automatically when a rangefinder is detected
in the LBUS daisy-chain and a lens file is loaded. The rangefinder main screens consist of
a rangefinder overview and a rangefinder settings screen.
Note: The rangefinder adjustment menu can be accessed from both rangefinder main
screens quickly by tapping and holding the touch display or by pressing and holding the
menu button 2 (MB2).
6.1.4.1. Rangefinder overview screen
1
Measured rangefinder distance (value)
2
Measured rangefinder distance (position)
3
Actual focus position (white)
4
Actual knob position (red)
5
Target direction indicator
6
DOF range
7
Rangefinder sensor warning
The rangefinder overview screen displays the rangefinder information grafically and
numerically.
The target direction will be indicated visually in relation to the actual knob position to
allow quick orientation and a precise focus pull towards the measured target.
When autofocus is activated, the actual focus position will move from the actual knob
position and match the measured rangefinder distance. The visualization of the actual
knob position allows the knob to be aligned to the measured distance for a seamless
switch back to manual focus when autofocus is deactivated. cPRO offers numerous
autofocus trigger functions. Please also refer to section “6.2.3.8.2. User button
functions” on page 96 in this manual.
The numeric rangefinder distance value will turn green if the measured rangefinder dis-
tance is within depth of field.
Note: When using cmotion’s cfinder III, the rangefinder’s sensor warning will be displayed if
a target is not detected. (Please refer to the cfinder III user guide)
2
6
3
1
7
4
5
5