All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 57 of 120
6.2.3.3.4.
Create
The Create menu allows you to create a lens file using the cPRO / cPRO PLUS or cPRO
ONE hand unit’s internal lens wizard. To create a new lens file, follow the procedure below.
Note: While creating a new lens file, it is possible to exit the lens wizard using the back
function (MB1) or the HOME button at any stage without loosing recently entered data.
NOTICE
Please make sure the motor is correctly assigned to the right or left side of the camera. Please
refer to section “6.2.3.4.2.3. Direction” on page 78 in this manual.
Once you re-enter the lens wizard, you can select whether you want to create a new lens
or continue with the lens from the previous session. Press “clear” (MB3) if you want to
delete all data from the previous session and start creating a new lens. Press “next” (MB2)
if you want to keep the data from the previous session and continue creating data for that
lens. Press “back” (MB1) to return to the previous menu page.
6.2.3.3.4.1. Motor calibration
Please ensure ALL motors are fully calibrated. If they are already, you can press “skip”
(MB2).