All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 14 of 120
Main features:
•
Ergonomic and balanced design
•
Extensive software features for creative FIZ control
•
Supports lens data with cPRO motor / cPRO camin
•
Touch display for menu navigation and settings
•
Intuitive thumb wheel for menu navigation, settings and 4th axis control
•
Illuminated pre-marked focus rings and iris strips with LED status feedback
•
Illuminated, user assignable buttons
•
3 additional user assignable buttons for cPRO PLUS only
•
Vibrating function
•
USB for external power source, updates and transfer of lens files and user settings
•
Mounting options for accessories like cstrap, monitor bracket or v-lock plate
•
Adjustable mechanical hard stops
•
Panic button for mechanical hard stop override
•
Integrated cmotion red radio module
•
Daisy-chain compatible via LBUS for hard-wired operation
•
Lightweight (less than 900g (approx 31 oz) incl. battery and antenna)
4.1. LBUS connector
LBUS is a bus standard designed to allow multiple lens motors and control devices to
communicate with each other. Up to four cforce-type motors can be chain-linked in a row.
Each cforce motor has two identical, bi-directional LBUS interfaces providing power and
control signals to the motor. For hard-wired operation the cPRO
/ cPRO PLUS
or cPRO
ONE hand unit can be connected to the daisy-chain through its LBUS interface using any
LBUS to LBUS cable.
4.2. CAM interface
The cPRO / cPRO PLUS and cPRO ONE hand units are equipped with an LBUS connector
but do not have integrated CAM connectors. However, the CAM interface on the cPRO
motor / cPRO camin is also a fully functional LBUS connector. As such, it allows multiple
lens motors and control devices to communicate with each other through K2.0015760 Cable
CAM (7p) - LBUS. Using this cable the cPRO / cPRO PLUS or cPRO ONE hand unit can also
be connected to the daisy-chain through its LBUS interface for hard-wired operation.
In addition, the CAM interface on the cPRO motor / cPRO camin offers a versitile interface
for camera control. There are several camera interface cables available which, depending
on the camera, offer start-stop control with feedback, camera status, tally and even camera
control. (License required to control camera settings / available with Software Release
Package v3.0 or higher).
If a camera is detected in the LBUS daisy-chain, camera data and camera feedback will be
displayed on the cPRO
/ cPRO PLUS
or cPRO ONE hand unit.