All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 50 of 120
6.2.3.2.1.5. Lock
The lock menu allows you to lock the knob (e.g. if shooting with a locked off camera).
A small red lock will be displayed in the status bar on all main screens. The letter “K” for
knob will illuminate each time you turn the knob. The knob illumination will start flashing
red, indicating that the knob is locked and motor control is not available.
6.2.3.2.2.
Slider
(cPRO / cPRO PLUS hand unit feature only, not available for cPRO ONE hand unit)
The slider menu contains all settings related to the slider control interface and consists of:
Control (status)
Slider limits (status)
Pre-marked strips
Lock (status)
6.2.3.2.2.1. Control
The control menu allows you to assign the axis you want to control (Focus / Iris / Zoom
/ Filter / Aux / AF ramp / Off) to the slider. If you select Off, the slider will have no control
over any axis and will turn its marker strip illumination and status LEDs off.
6.2.3.2.2.2. Slider limits
The slider limits menu allows you to set three different limit modes.
Motor limits
Motor + control limits
Control limits
Motor limits: This function spreads a predefined rotation of the assigned motor to the full
virticle movement of the slider. E.g. for precise iris racks, where you want to have more
resolution for a certain range of the iris.
Motor + control limits: This function limits the travel of the slider and the travel of the iris
motor. Basically, this function allows you to set electronic hard stops at two predefined
iris marks.