All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 29 of 120
6.1.1.
MAIN screen
MAIN screen if lens file loaded MAIN screen if no lens file loaded
1
Focus information (value/percentage)
2 Iris
information
(value/percentage)
3 Zoom
information
(value/percentage)
4
Depth of field range
5
Actual focus position (white)
6
Actual knob position (red)
7
Status bar (with battery status and RF signal strength)
The MAIN screen displays focus, iris and zoom information on a simple GUI. If a lens
file is loaded, it will display the actual focus, iris and zoom values with depth of field
displayed as a green bar. Without an active lens file, the motor position will be displayed
as percentage of the calibration range.
The status bar is displayed on every page. It provides information including battery status,
wireless signal strength (or cable mode) and if a lock is active on one or more interface.
If a rangefinder is attached to the LBUS daisy-chain, and the measured distance is within
the depth of field (DOF), the focus value will change from white to green.
1
Measured rangefinder distance
2
Actual focus position (white)
3.
Actual knob position (red)
4
Depth of field range
When autofocus is activated, the actual focus position will move from the actual knob
position and match the measured rangefinder distance. The visualization of the actual
knob position allows the knob to be aligned to the measured distance for a seamless
switch back to manual focus when autofocus is deactivated. cPRO offers numerous
autofocus trigger functions. Please also refer to section “6.2.3.8.2. User button
functions” on page 96 in this manual.
3
2
1
7
7
1
4
5
3
2
6
3
1
2
4
3
1
2