All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 37 of 120
6.1.7.
Motors main screens
1
Axis (Focus/Iris/Zoom/Aux)
2
Torque (Min/Weak/Strong/Max)
3
Direction (Left/Right)
4
Ramp (Min/Short/Long/Max)
5
Device in control (this unit / name, serial number)
6
LBUS device ID (serial number/name)
The motors main screens display information for up to 4 daisy-chained cforce / cPRO
motors.
Axis: Displays information about the motor assigment to focus, iris, zoom or Aux.
Note: The axis menu only changes the assignment of the motor, not the assignemnt of the
control interface.
Torque: Displays information about the motor strength (Min/Weak/Strong/Max).
Direction: Displays information about the motor being mounted on the left or on the right
side of the camera.
Note: The direction is defined from the operators point of view, from behind the camera.
Ramp: Displays information about the start and stop acceleration of the motor in relation
to the controller. (Min/Short/Long/Max) The greater the ramp, the smoother the motor will
speed-up and slow-down.
Ctrl: Displays information about the controlling device. If multiple hand units are used
and the highlighted motor is being controlled by a controller other than the one you are
viewing the menu on, “this hand unit” Ctrl will display the name and serial number of the
hand unit which is controlling that motor.
Note: The motors adjustment menu can be accessed quickly from all motors main screens
by tapping and holding the touch display or by pressing and holding menu button 2 (MB2).
1
2
4
5
6
3