manualshive.com logo in svg

cmotion cPRO, User Manual, Page: 66 / 120

Share
Download
cmotion cPRO User Manual Download Page 66

All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.

http://www.cmotion.eu

page 66 of 120

6.2.3.3.5. 

Edit

The edit menu allows you to edit existing lens files on the cPRO / cPRO PLUS or cPRO 

ONE hand unit using the lens wizard. 

Note: If you are editing a lens file and you leave the lens wizard by pressing the back function 

(MB1) or the HOME button, changes will not be saved. The following warning message will 

be displayed.

You can then confirm whether you do want to leave the lens wizard by pressing “abort” 

(MB3), or return to the lens wizard by pressing “back” (MB1). 

The “edit lens” feature follows the exact same procedure as the “create lens” function 

with the exeption, that you have to select the lens file you want to edit from the dynamic 

list. Please also refer to section “6.2.3.3.4. Create” on page 57 in this manual.

Summary of Contents for cPRO

























































































































Reviews:

No comments