All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 87 of 120
to confirm the clip and to enter the playback wizard. Or, use the thumb wheel to select
another clip.
Note: If you enter the playback menu through the menu structure, the last replayed clip will
be selected automatically. When using this workflow, the camera will not switch to playback
mode immediately, but will wait until a clip is selected by pressing the select button (MB2).
Note: Press UB3 while in the dynamic clip list to show detailed clip information. Press UB3
again to return to the dynamic clip list.
While in the playback wizard, the user buttons 1-3, the menu buttons 2 and 3, the touch
screen, and the thumb wheel can be used to navigate through the clips and the clip list
on the camera.
Function
Buttons
Touch screen
Thumb wheel
PLAYBACK / PAUSE
MB2 “play”
tap PLAY icon
FAST FORWARD (4x/8x/16x) (multi-) press
UB3
tap FAST FORWARD
icon
scroll counter clock-
wise
FAST REVERSE (4x/8x/16x)
(multi-) press
UB2
tap FAST REVERSE
icon
scroll clockwise
NEXT CLIP
MB3 “next”
tap NEXT CLIP icon
PREVIOUS CLIP
UB1
tap PREVIOUS CLIP
icon
leave PLAYBACK WIZARD)
MB1 “back”
6.2.3.6.7.
Camera Buttons
The camera buttons menu shows you which camera function is assigned to the camera
user button 1-6 (from top to bottom).
Note: In order to trigger the camera user button, you must assign a cPRO user button to
camera button 1-6.
NOTICE
For ARRI cameras the WCU-4 user buttons 1-6 can be triggered through the cPRO hand unit.
For RED cameras the touch buttons 1-4 can be triggered through the cPRO hand unit.
For further information on how to assign camera features to a camera user button and which
camera features are available, please refer to the corresponding camera manual.
For further information on how to assign a cPRO user button , please refer to section “6.2.3.8.
BUTTONS” on page 94 in this manual).