All content © 2020, cmotion GmbH. All specifications are subject to change without further notice.
http://www.cmotion.eu
page 34 of 120
1
Measured rangefinder distance (value)
2
Measured rangefinder distance (relative position)
If no lens file is loaded, only the measured rangefinder value and its realtive position to the
calibration range will be displayed.
6.1.4.2. Rangefinder settings screen
1
Autofocus (on/off)
2
Laser pointer (on/off)
3
Sensitivity settings
4
Offset (value)
5
Rangefinder limits (on/off)
6
LBUS device ID (serial number/name)
Autofocus: The autofocus icon will turn green if autofocus is on. If autofocus is off, it
illuminates white.
Laser pointer: The laser pointer icon will turn green if the laser pointer is on. If the laser
pointer is off, it illuminates white.
Sensitivity: Shows the sensitivity settings grafically.
Offset: The offset icon will turn green if an offset is set to a value other than 0, and will
display the offset value numerically.
Limits: The limits icon will turn green if a rangefinder limit other than “limit max” = infinity
or “limit min” = 0 is set. Otherwise, the icon will illuminate white.
1
2
5
2
6
3
1
4