Club Car CARRYALL 1 2000, Maintenance And Service Manual

Page: 92 / 136

WHEEL BRAKE ASSEMBLIES Rear Brake Cables
Page 6-20 2000 Turf/Carryall Vehicle Maintenance and Service Manual
6
3. Rotate brake cables upward and pull ends through holes in top of equalizer.
4. Disconnect brake cables at rear wheels.
4.1. Remove cotter pins (1) clevis pins (2) and E-clips (3) (Figure 6-33, Page 6-20 ).
4.2. Remove cable (4) from cable support bracket (5).
4.3. Note location of hangers (for installation of cables). Pull cables out of vehicle.
INSTALLATION
1. Place the cables ends in the equalizer (4) ( Figure 6-32, Page 6-20) . Route cables through hangers in
the same manner as the ones removed.
2. At the rear wheel brakes, connect the cables to the brake actuator arms using clevis pins (2) and new
cotter pins (1) ( Figure 6-33, Page 6-20) .
3. Place cables in cable support bracket (5) and secure with E-clips.
4. Adjust brakes as described in this section for the appropriate vehicle.
Figure 6-32 Loosen Equalizer Nut
Figure 6-33 Disconnect Cables at Rear Brakes
1
3
2
4
1
2
4
3
5