REAR SUSPENSION
Jounce Bumpers
2000 Turf/Carryall Vehicle Maintenance and Service Manual Page 9-9
9
5. Place lock washer (7), flat washer (4), spacer (2) and compression mount (3) onto bolt (6). Install bolt
through mounting hole in stabilizer bar and place another compression mount (3) and flat washer (4)
onto bolt
.
6. Install the bolt (6) with lock washer (7) through the upper stabilizer bar link mount (8) into the stabilizer
bar link (5) and finger tighten.
7. Repeat steps 5 and 6 for the other side of the stabilizer bar.
8. Tighten bolts (6) in the stabilizer bar links (5) to 17 ft-lb (23 N·m).
9. Place jack under transaxle and raise vehicle enough to remove jack stands. Lower the vehicle to the ground.
JOUNCE BUMPERS
Read WARNING on page 9-1.
REMOVAL
1. Grip jounce bumper (19) and pull from bumper mount (20)
INSTALLATION
1. Insert jounce bumper (19) into bumper mount (20)
. Make sure the entire cir-
cumference of bumper is seated firmly in mounting hole.