Club Car CARRYALL 1 2000, Maintenance And Service Manual

Page: 90 / 136

WHEEL BRAKE ASSEMBLIES Front Brake Cables
Page 6-18 2000 Turf/Carryall Vehicle Maintenance and Service Manual
6
FRONT BRAKE CABLES
Read WARNING on page 6-1.
REMOVAL
1. Remove cotter pin (2) and clevis pin (3) from brake lever arm on front brake cluster (Figure 6-30, Page 6-18) .
2. Remove E-clip (1) from brake cable housing at the front spindle bracket and remove cable from spindle
(Figure 6-30, Page 6-18) .
3. Remove cotter pin (9), clevis pin (10), and E-clip (8) from brake cable at equalizer (18) (Figure 6-31, Page 6-19) .
4. Remove bolt (4) and nut (6) from brake cable clamp (5) (Figure 6-30, Page 6-18) .
5. Remove cable from vehicle.
INSTALLATION
1. Place brake cable through frame mounting hole behind equalizer and install E-clip (8) on cable housing
(Figure 6-31, Page 6-19) .
2. Place brake cable clevis (6) on equalizer (18) and install the clevis pin (10) and new cotter pin (9)
(Figure 6-31, Page 6-19) .
Figure 6-30 Front Brake Cables
TYPICAL BOTH
SIDES OF VEHICLE
2
3
1
4
6
8
7
5