Clevo P870KM User Manual Download

Page: 169 / 330

Modules

Setting Up SATA RAID, Optane™ or AHCI Mode 6 - 21

Deleting a RAID (Windows 10)

If you wish to delete an existing RAID then follow the procedure below to do so. How-
ever

backup up any necessary files and data before deleting a RAID

, as doing so

will result in the loss of all data on the RAID volumes.

Start-up your notebook computer and press <F2>

to enter the

BIOS

Go to

Intel(R) Rapid Storage Technology

(in the

Advanced

menu) and press

<Enter>.

Go to the RAID (listed under

RAID Volumes:

) and press <Enter>.

Select

Delete

and press <Enter>.

Select “

Yes

” (note that al the data on the volumes will be lost) and press <Enter>.

Figure 6 - 11

Delete RAID

(Advanced > Intel(R)

Rapid Storage

Technology)

Summary of Contents for P870KM











































































































































































































































































































































Search results

Summary of Contents for P870KM

Reviews:

Related manuals for P870KM

Brands by name

Popular brands

Clevo P870KM, User Manual

Search results

Summary of Contents for P870KM

Reviews:

Related manuals for P870KM

Brands by name

Popular brands