Clevo P870KM User Manual Download

Page: 266 / 330

Control Center & Flexikey®

B - 14 CPU / Memory Overclocking Support

Memory Overclocking

Click the

Memory

tab at the bottom right of the screen and the Memory overclocking tab will pop out to allow

adjustments to be made.

Click

Custom

to adjust any settings from the drop-down menus.

Click

Save

to retain the settings.

A warning will pop-up to remind that you will need to

restart the system

(make sure you save any open files).

Click

Restart Now

to restart the system or

Cancel

to return to the utility.

You can click

Default

to go back to the standard default settings.

Figure B - 8

- Memory Overclocking

Summary of Contents for P870KM











































































































































































































































































































































Search results

Summary of Contents for P870KM

Reviews:

Related manuals for P870KM

Brands by name

Popular brands

Clevo P870KM, User Manual

Search results

Summary of Contents for P870KM

Reviews:

Related manuals for P870KM

Brands by name

Popular brands