Clevo P870KM User Manual Download Page 204

Page: 204 / 330

Modules

6 - 56 Intel® Rapid Storage Technology

Intel® Rapid Storage Technology for RAID Systems

Intel® Rapid Storage Technology

application displays status information on your

RAID configuration. Run the

Intel® Rapid Storage Technology

application from

the item in the

Start

menu.

When the

Intel® Rapid Storage Technology

application

is launched the system

will open the

Status

window. Here you can view the general health of the storage

system. Various volume creation and management options are available depending
on the system’s status.



IRST and M.2 PCI-e

SSDs

Note that Intel® Rapid
Storage Technology

does not support M.2
SSDs with a

PCI-e In-

terface

(M.2 SSDs with

a SATA Interface are
supported).

Figure 6 - 35

Intel

Rapid

Storage Technology

Status

Summary of Contents for P870KM











































































































































































































































































































































Search results

Summary of Contents for P870KM

Reviews:

Brands by name

Popular brands

Clevo P870KM, User Manual

Search results

Summary of Contents for P870KM

Reviews:

Brands by name

Popular brands