manualshive.com logo in svg

Clevo P870KM, User Manual

Share
Download
Clevo P870KM User Manual Download Page 248

Interface (Ports & Jacks)

A - 2 Interface (Ports & Jacks)

A

Ports and Jacks

Item

Description

2-in-1 Audio Jack 

(Headphone-Out & S/

PDIF-Out Jack)

Headphones

 may be connected through this jack. 

Note

: Set your system’s volume to a reduced

level before connecting to this jack. In addition this jack also functions as a S/PDIF (

Sony/Philips

Digital Interface Format

) Out port allowing you to connect your DVD-capable PC to a Dolby AC-

3 compatible receiver for “5.1” or ‘dts’ surround sound.

Card Reader

The card reader allows you to use the following digital storage cards:

MMC (MultiMedia Card) / RSMMC

SD (Secure Digital) / Mini SD / SDHC /

 

SDXC (up to UHS-II)

Push the card into the slot and it will appear as a removable device.

DC-In Jack

Plug the supplied AC/DC adapter into this jack to power your computer.

HDMI-Out Port

The  HDMI-Out  (

High-Definition Multimedia Interface

) port is an audio/video connector

interface for transmitting uncompressed digital streams. This allows you to connect an external
monitor, TV or Flat Panel Display etc. as a display device

 

(see

 

“” on page C - 16

) by means of a

HDMI cable. 

Note that HDMI carries both audio and video signals.

Line-In Jack

The Line-In jack allows you to play audio sources through the computer’s speakers. Note that
audio input through Line-in will default to the 

mute

 setting. To set up your audio sources to play

through the Line-in jack go to the 

Sound  

control panel and make sure the Mute box is not

checked. 

Summary of Contents for P870KM











































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands