Clevo P870KM User Manual Download Page 133

Page: 133 / 330

BIOS Utilities

Main Menu 5 - 7

SATA Port # (Main Menu)

Pressing

Enter

opens the sub-menu to show the configuration of a optical Device/

HDD on the computer’s SATA Ports.

OffBoard SATA / NVMe Controller Configuration (Main Menu)

Pressing

Enter

opens the sub-menu to show the configuration of any devices on the

off board SATA / NVMe Controller if applicable.

System/Extended Memory (Main Menu)

This item contains information on the system memory, and is not user configurable.
The system will auto detect the amount of memory installed.

MB Series / BIOS Revision / KBC/EC firmware Revision / VGA Card / Mac Ad-
dress (Main Menu)

This item contains information on the BIOS version, and the identifier address for
the device on a network, and is not user configurable.

Summary of Contents for P870KM











































































































































































































































































































































Search results

Summary of Contents for P870KM

Reviews:

Brands by name

Popular brands

Clevo P870KM, User Manual

Search results

Summary of Contents for P870KM

Reviews:

Brands by name

Popular brands