FOR YOUR SAFETY
Do not store or use gasoline or other flam-
mable vapors or liquids in the vicinity of this
or any other appliance.
GAS LEAK INSTRUCTIONS
Post in a prominent location, instructions
to be followed in the event the user smells
gas. This information shall be obtained by
consulting the local gas supplier.
For safe and efficient operation of this equipment, this manual must be retained by the owner/user
for future reference.
PROTECTING WARRANTY COVERAGE
The warranty printed to the left specifies the owner/user's responsibility for proper installation, operation,
and maintenance of the SteamCraft 10. If these responsibilities are not met, toe Limited Warranty and/or
Extended Limited Warranty coverage may be adversely affected. The following table is provided to assist
the owner/user in meeting these responsibilities. In addition, the warranty advantages of installing a
SteamerGard water treatment system are explained after the table.
The Warranty Protection Table lists installation, operation, and maintenance factors that have i
n
the past
adversely affected warranty coverage. The owner/user of a SteamCraft 10 should pay particular attention
to these factors to protect his warranty coverage. This table is not a comprehensive list of the owner/user's
responsibilities. Cleveland Range steam products are intended for use only by professionally trained
personnel To meet his responsibilities, the owner/user must supplement this guide with any additional
actions consistent with the operation of steam generating food preparation equipment by a trained
professional.
Warranty Protection Table
SUBJECT
PAGE
REFERENCE
Electrical Power Requirements & Line Voltage
10
Water Quality Requirements & Analysis
11
Water Pressure
16
Vented Drain
20
Level Operation
19
Blowdown Frequency
55 & 63
Steam Generator Maintenance & Maintenance Records
67
Descaling Frequency & Procedure
68
Approved Chemical Cleaners
68
Authorized Maintenance & Repair
74
SteamerGard Water Treatment System
A SteamerGard water treatment system protects the SteamCraft 10 from impurities contained in regular
lap water, especially Total Dissolved Solids (TDS) which cause lime and scale deposits in steamer
equipment. The protection is so effective that Cleveland Range increases toe warranty coverage on a
Steam Craft 10 installed in conjunction with a SteamerGard system to five years for parts and three years
for labor on water related components, elements, valves, generators, piping, etc. However, even with a
SteamerGard system installed, the owner/user should follow toe guidance of the Warranty Protection
Table.
