6
After determining the handle
rotation, insert the fixed stop into the
next open hole and use as a guide
for bending additional parts.
When greater precision is required,
attach the adjustable stop as
accurately as you can at the limit of
handle rotation. Make a test part with
scrap material, and reposition the
adjustable stop as necessary. Tighten
bolt and nut securely before bending
production parts.
NOTE:
If precise dimension are
required, start by making a
test part using scrap
material of the same thickness. Readjust the setup as necessary.
NOTE:
Once you determine the dimensions, die size(s), holes, and
bending sequence for a part, write down the information for
future reference.
