32
LETTER K
STOCK REQUIRED
• 3/16” stock; 2” max.
width
• 1 x 7in blank
• 1 x 6in blank
• 1 x 2-1/2 in blank
SETUP
Make chalk marks on the 7”
blanks as shown on the
“Bend Sequence.”
BEND
Insert the blank into the
Bender to the chalk mark,
and bend until it measures 6
in. as shown.
FINISHING
Tack-weld the pieces together as shown.
Re-check that the outer tips of the bent piece are equal distances from the
straight piece. Grind and sand all sharp corners.
LETTER L
STOCK REQUIRED
• 3/16” stock; 2” max. width
• 1 x 10-3/8in blank
SETUP
Make chalk marks on the blanks as shown on the “Bend Sequence.”
BEND NO. 1
Insert the blank into the Bender to the #1 chalk mark, and bend it to 45°. Re-
check the angle.
