34
FINISHING
Turn the “V”s upside down and tack weld them together as shown. Check
that the three bottom tips are aligned.
Grind and sand all sharp corners.
LETTER N
STOCK REQUIRED:
• 3/16” STOCK; 2” max width
• 1 X 8-1/16” blank
• 2 x 6 in blanks
SETUP
Make chalk marks on the 8-1/16” blanks as shown on the “Bend Sequence.”
BEND NO. 1
Insert the blank into the Bender to the #1 chalk mark, (as in A), and bend it to
73°. Re-check the angle.
BEND NO. 2
Reverse the stock end-for-end. Slide it to the #2 chalk mark, and bend it to 73°.
Re-check the angle.
