2
INTRODUCTION
Thank you for purchasing this CLARKE product. The compact metal parts
bender allows you to economically make a variety of bends in flat, square or
solid round stock. These instructions provide basic information on using the
bender, plus step-by-step examples of how to bend stock to make several
common products. We urge you to read the complete Operation section
before trying to use the bender.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you and you can look forward to your purchase
giving you long and satisfactory service.
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
SAFETY PRECAUTIONS
To protect against serious injury, use common sense and observe the following
precautions when using this product. Clarke International is not responsible for
misuse of the equipment.
• ALWAYS secure the metal bender to the floor or bench before use.
• ALWAYS study these instructions before operating and pay close
attention to all warnings.
• ALWAYS keep the work area free of obstructions.
WARNING: THE USER MUST FOLLOW ALL INSTRUCTIONS WITHIN THIS
INSTRUCTION BOOKLET
