26
BEND NO. 3
Reverse the stock end-for-end. Slide it to the #3 chalk mark (as in C), and bend
it to 45°. Re-check the angle.
BEND NO. 4
Slide the stock to the #4 chalk mark (as in D), and bend it to 45°.
Re-check the angle. Re-check that the two legs are parallel.
To remove the part from the Bender, remove the pin that holds the sharp-
angle-bend attachment.
FINISHING
Tack-weld the 6 in. piece to form the back of the letter “D”. Grind and sand all
sharp corners.
