[SMB-66E]
-
74
-
ALARMS
5
LED
Display
ALARM
No.
Description
ALARM
Output
Remarks
3
Actuator/Driver
combination abnormal
Alarm 1
An actuator different from the previous
one is connected (model error).
An actuator different from the previous
one is connected (serial number error in
same model).
(Hyphen
)
Activation of safety
function
Wait for ready return input after
activation of safety function
(Under
score)
During activation of safety function
The 7-segment LED on the left side shows
(an r and a dot) without an alarm.
The 7-segment LED on the right side shows the operation mode.
For reduced wiring specification (option -U2, -U3, or -U4 is selected in the model number), a
serial communication station number (a 2-digit number without dots) is displayed instead
of the operation mode in the 7-segment LED.
For servo off (M5 executed),
(dot only) will be displayed.
Note : If Teaching Pendant is connected to the H type driver shipped in 1998 or earlier,
alarm 7 (communication error) may be caused.
Reset to continue to operate.
Summary of Contents for AX0180
Page 60: ...SMB 66E 52 OPERATION 2 MEMO...
Page 88: ...SMB 66E 80 PROCESS FLOW 7 MEMO...
Page 94: ...SMB 66E 86 PROCESS FLOW 7 MEMO...
Page 102: ...SMB 66E 94 PROCESS FLOW 7 MEMO...