CKD AX0180, Instruction Manual

Page: 3 / 103

z
DO NOT TOUCH the terminal strip in the front panel of the
driver, as it is charged with high voltage, when power is
ON. Also do not touch the terminal for about 5 minutes
after power is turned off until the internal condenser
discharges high voltage.
z
TURN OFF POWER before mounting or dismounting
connectors as equipment malfunction, damage, and
electrical shock can be caused.
z
Do not operate in explosive or fire atmosphere.
DANGER:
！
z
Servo off including emergency stop and alarm and brake
off with rotational force is applied e.g. by gravity may cause
the actuator to rotate. Operate the actuator in the
balanced condition so that rotational force is not applied for
these operations after all safety aspects are confirmed.
z
Keep hands away from the rotating part as sudden motion
may take place during gain adjustments or trial run.
Make sure of the safety in the full revolution of the actuator
before turning it on to adjust.
z
When auto tuning is executed, the actuator rotates and the
load is estimated. Make sure that the safety is assured to
operate the actuator.
z
Make sure that the safety is assured to operate the
actuator in case the unit is operated from the place unable
to confirm the motion.
z
DO NOT TOUCH the actuator and the driver during
operation or just after stopped. There is a risk to get
burned. Keep away from actuators and drivers during
operation or immediately after operation is stopped.
Otherwise you may suffer from burns.
z
Do not remove devices until the safety is confirmed.
WARNING
:
！