CKD AX0180, Instruction Manual

Page: 30 / 103

OPERATION
2
2.5.2 Actuator position displaying procedure
1) Select "2 POSI" from the display mode menu.
ＤＩＳＰＬＡＹ ＭＯＤＥ
１Ｉ／Ｏ ２ＰＯＳＩ →
2) Then, the current actuator coordinate in pulse units
is displayed.
Following information can be displayed in the
position displaying menu.
Coordinate Unit
ＰＯＳＩ （ＡＣＴＵ）
２７０２２１ ＰＬＳ
ＰＯＳＩ （ＡＣＴＵ）
１７９．９２３ ＤＥＧ
ＰＯＳＩ （ＵＳＥＲ）
２７０２２０ ＰＬＳ
ＰＯＳＩ （ＵＳＥＲ）
１７９．９２３ ＤＥＧ
ＰＯＳＩＤＥＶ
１０ ＰＬＳ
ＡＣＴＵ ＴＥＭＰ
３０ ゜Ｃ
1: ACTU···································· PLS
2: ACTU···································· DEG
3: USER ··································· PLS
4: USER ··································· DEG
5
：
POSIDEV ····························· PLS
6
：
ACTU TEMP························· DEG
※
Actuator temperature will display the
temperature calculated by the electronic
thermometer.
Press or to switch between the
information to display.
2.5.3 Alarm displaying procedure
ＤＩＳＰＬＡＹ ＭＯＤＥ
←２ＰＯＳＩ ３ＡＬＡＲＭ
Alarm number
Description of alarm
ＡＬＡＲＭ ０
ＮＣ ＰＲＧＭ ＥＲＲＯＲ
1) Select "3 ALARM" from the display mode menu.
2) Next, the current alarm data is displayed.
※ Refer to Section 5.1 "Alarm display and
Description."
If there are multiple alarms, press or
to display another alarm.
If there is no alarm, the following is displayed.
[SMB-66E]
－
22
－
★
If there are alarms 0 and 7
ＡＬＡＲＭ ０
ＮＣ ＰＲＧＭ ＥＲＲＯＲ
ＡＬＡＲＭ ７
ＣＯＭ ＥＲＲＯＲ
★
If there is no alarm
ＮＯ ＡＬＡＲＭ
（ＳＲＶ ＯＮ）