CKD AX0180, Instruction Manual

Page: 36 / 103

[SMB-66E]
－
28
－
OPERATION
2
2.6.1.4 Checking the setting range of the parameter
Press during data entry to display the
setting range of the parameter.
Press to return to the original screen.
※
※ ※
※
If the setting range of the parameter is not
displayed at a time, a continuation mark ("→")
is displayed at the parameter setting range
(lower limit value).
Press to display the upper limit value of
the parameter setting range.
Press to return to the previous screen.
2.6.1.5 Canceling entered data
Press or
MODE
during data entry.
The entered data is canceled.
2.6.1.6 After changing parameter data
1) Press
MODE
when the cursor is located at the
parameter number position.
2) The parameter mode menu is displayed and
the cursor moves to "3 STORE."
※ ※ ※ ※
The new data is valid only in Teaching
Pendant.
To store the new data to the ABSODEX
driver, execute "3 STORE."
ＣＡＭ ＣＵＲＶ Ｐ０１
［１］ＭＳ
ＣＡＭ ＣＵＲＶ ＲＮＧ
１～５
★
If the setting range is not displayed at a
time
ＳＯＦＴ ＬＭＴ Ｂ Ｐ０９
［－６６５８．３８０］゜
ＳＯＦＴ ＬＭＴ Ｂ ＲＮＧ
－６６５８．３８０～ →
ＳＯＦＴ ＬＭＴ Ｂ ＲＮＧ
← ～６６５８．３７９
Enter "2."
or
MODE
(Cancel)
The value before
change is restored.
ＣＡＭ ＣＵＲＶ Ｐ０１
［１］ＭＳ
ＣＡＭ ＣＵＲＶ Ｐ０１
［２］ＭＣ
ＣＡＭ ＣＵＲＶ Ｐ０１
［１］ＭＣ
MODE
ＣＡＭ ＣＵＲＶ Ｐ０１
［１］ＭＳ
ＰＡＲＡ
←２ＣＮＴ ３ＳＴＯＲＥ→