388
BRAKES
B3FP16ED
HANDBRAKE (Adjustment)
Adjustment (continued)
(10)
Nut for adjusting cable tensions.
Remove:
- The rear wheels.
- The drums (according to version).
Release the handbrake.
Use a gauge set to measure at
«a»
the travel of the lever
from its stop.
Adjust the nut
(10)
to obtain a travel of less than or equal to
1 mm at
«a»
.
Refit the brake drums without tightening them (according to
version).
Action the handbrake lever
8 times
with an effort of
40 m.daN.
With the handbrake released, check the travel of the lever
at
«a»
, using a gauge set.
NOTE :
The travel should be less than
1 mm
and more than
0,05 mm
.
Refit:
- The brake drums.
- The wheels.
- The central console.
Check the operation of the handbrake.
C3
