manualshive.com logo in svg

CITROEN Berlingo 2003, Handbook

Share
Download
CITROEN Berlingo 2003 Handbook Download Page 160

156

ENGINE

CHECKING AND SETTING THE VALVE TIMING

Engines : 8HY - 8HV

B1EP18YD

Checks (continued).

Refit the screw

(8)

.

Rotate the crankshaft 

six times 

(clockwise).

IMPERATIVE : Never rotate the engine backwards.

Peg : 
- The camshaft, using tool 

[2]

. (Oil the pegs.)

- The fuel high pressure pump pulley 

(14)

, using tool

[3] 

at 

«c»

.

WARNING: 

The magnetic track should show no signs of damage and should not

be approached by any source of magnetism.

Peg the crankshaft at 

«b»

, using tool 

[3]

.

IMPERATIVE: Should it be impossible to peg the camshaft, check that the off-
set between the hole in the camshaft pinion and the pegging hole is not grea-
ter than 1 mm.
Otherwise repeat the operation to position the timing belt. (See correspon-
ding operation).

C3

Summary of Contents for Berlingo 2003



































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands