manualshive.com logo in svg

CITROEN Berlingo 2003, Handbook

Share
Download
CITROEN Berlingo 2003 Handbook Download Page 138

134

ENGINE

CHECKING AND SETTING THE VALVE TIMING

Engine : NFU

B1EP18PC

Setting the timing (continued)

Engine: NFU

Slacken the tensioer roller.

Turn the tensioner roller so as to be able to position the tool

[4]

, with the aid of an Allen key placed at 

«a»

.

Turn the tensioner roller towards the right to bring it to the index

«c»

in position 

«b»

.

Peg the tensioner roller in this position in order to slacken the timing belt to the maximum.

IMPERATIVE : Never make the dynamic tensioner roller turn by a complete rotation.

Remove the timing belt

(8)

Check that the rollers

(9) 

and

(10) 

turn freely (no tight spot).

B1EP18QC

C3

Summary of Contents for Berlingo 2003



































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands